Macxol Hydraulic 10WC4
Macxol Hydraulic 10WC4 Oils are anti wear type hydraulic oil specially formulated with selected high viscosity index base stocks, rust, inhibitor demulsifier, anti foam inhibitor, anti oxidant additives.
These oils have long service life and are recommended for general hydraulic equipment in control and power transmission systems having vane pump requiring mild extreme pressure properties. These oils can also be used for compressor crankcase lubrication, but not recommended for lubrication of turbines and equipment having silver coated components. It may be used in a wide variety of application including air line lubricators, bearings, high speed spindles, hydrostatic transmissions, hydraulic couplings etc.
It contains special zinc phosphorus anti wear additives which prevents such excessive wear & ensures long pump & valve life.
These oils meet IS : 10522 /1983 and DIN 51524 (Part 1) Specifications,
ADVANTAGES :-
- OPTIMUM VISCOMETERIX MATCH AS PER SYSTEM REQUIREMENT.
- EXCELLENT AIR RELEASE VALUE.
- MAXIMUM WATER SEPARATIBILITY & LOW PUMP WEAR.
- BUILT – IN ANTIRUST, ANTICORROSION, ANTIWEAR AND HIGH OXIDATION STABILISING PROPERTIES.
- LONGER EQUIPMENT PROTECTION AND HIGH LOAD CARRYING CAPACITIES.
- IDEAL FOR HYDRAULIC SYSTEM SPECIALLY FOR ITS LONG SERVICE LIFE, EXCEPTIONAL ANTIWEAR LUBRICATION AND LOAD BEAING POWER.
Typical Properties
| SI. NO. | Properties | Macxol Hydraulic 10wc4 |
| 1. | Kin. Viscosity at 100 oC
Cst |
6.3 |
| 2. | Kin. Viscosity at 40 oC
Cst (typical) |
37.7 |
| 3. | Viscosity Index, Min | 114 |
| 4. | Flash point (COC) oC Min | 235 |
| 5. | Pour Point | -20 |
Available Size (Packing)
10LTR, 20LTR, 50LTR, 200LTR
